Pro Grass Grand Static Grass Applicator

Check out our article explaining the differences between all our Pro Grass Applicators and the one about the Pro Grass Layering System that explains how to lay grass and how to use the applicator.

We also recommend watching this video from Martyn, WWScenics director, showing how to use the applicator.

How do I check that my Applicator is working?

To check the applicator is not faulty:

• Put the battery in and turn on the switch, the light should turn on
• Once turned on, put the crocodile clip in the hopper, if you can see some spark/an electric noise

If the applicator meets both requirements, then it is working.

Do you have any tips on how to use the Applicator? I can’t make the grass stand properly, any advice?

Here are some key things for you to check when using the applicator to apply static grass:

• Use a powerful brand-new battery (PP3 9V battery).
• Do not fill the hopper with too much grass, as the grass needs to have space to move.
• Only apply a smear of basing glue on the required area and make sure to apply the basing grass before it dries. Room temperature can affect this.
• Do not apply too much basing grass to the area. If you cover the basing glue with too much grass it will not stand but get all flat.
• Once you have applied the basing grass and can’t see the basing glue anymore, wait until the basing glue dries and add some layering spray adhesive before applying the layering grass.
• Make sure the crocodile clip is near the applicator’s head when applying the grass.

We also recommend you watch this video showing how to use the applicator.