Aplikator do trawy mikrostatycznej Pro Grass
£55.99
- Bardziej kompaktowy aplikator do trawy Pro, odpowiedni do nakładania trawy statycznej o grubości od 1 mm do 6 mm
- Idealny do tworzenia szczegółowych i realistycznych warstw trawy na mniejszych powierzchniach w makietach kolejowych, planszach bitewnych do gier wojennych, miniaturowych modelach bazowych lub dioramach
- Dostarczane z naszą głowicą z sitem średnim i wymaga baterii PP3 9V (nie dołączona)
- Aby uzyskać najlepsze rezultaty, używaj razem z klejem podkładowym WWS i sprayem do układania warstw WWS.
Opis
The Pro Grass Micro Applicator by WWScenics is a more compact, less powerful applicator ideal for smaller landscapes and areas. It comes with a medium sieve head suitable for 1mm, 2mm, 4mm and 6mm static grass and requires a PP3 9V battery (not supplied) to provide a static electrical current to charge the static grass fibres, causing them to arrange in a vertical position on your selected surface, giving a realistic 3D effect. The Micro Applicator is efficient with superb results (see images), wireless and only requires a 9v battery (so no unnecessary cables). It has a lightweight design yet is robust, versatile and time-saving (quicker than manually applying static grass – with better results). The Pro Grass Micro Applicator can be used for: Quickly flocking smaller areas Making grass tufts Adding detail to miniature model bases For larger landscapes, the Pro Grass Applicator is recommended. Full detailed instructions are also supplied, and we also have tutorial videos available online.
Made in Wales (UK)
Check out our article explaining the differences between all our Pro Grass Applicators and the one about the Pro Grass Layering System that explains how to lay grass and how to use the applicator.
We also recommend watching this video from Martyn, WWScenics director, showing how to use the applicator.
How do I check that my Applicator is working?
To check the applicator is not faulty:
- Put the battery in and turn on the switch, the light should turn on
- Once turned on, put the crocodile clip in the hopper, if you can see some spark/an electric noise
If the applicator meets both requirements, then it is working.
Do you have any tips on how to use the Applicator? I can’t make the grass stand properly, any advice?
Here are some key things for you to check when using the applicator to apply static grass:
- Użyj nowej baterii o dużej mocy (bateria PP3 9V).
- Nie należy napełniać kosza zbyt dużą ilością trawy, ponieważ trawa musi mieć swobodę ruchu.
- Nałóż klej bazowy tylko na wymaganą powierzchnię i upewnij się, że nałożysz trawę bazową zanim wyschnie. Temperatura pomieszczenia może mieć na to wpływ.
- Do not apply too much basing grass to the area. If you cover the basing glue with too much grass it will not stand but get all flat.
- Once you have applied the basing grass and can’t see the basing glue anymore, wait until the basing glue dries and add some layering spray adhesive before applying the layering grass.
- Make sure the crocodile clip is near the applicator’s head when applying the grass.
We also recommend you watch this video showing how to use the applicator.
Informacje dodatkowe
Waga | 340 g |
---|
Opinie klientów
Tylko zalogowani klienci, którzy zakupili ten produkt mogą napisać recenzję.
6 recenzje dla Pro Grass Micro Static Grass Applicator